.png?width=109&height=108&name=Pharma%20(2).png)
.png?width=111&height=108&name=Medical%20Devices%20(2).png)
.png?width=84&height=107&name=IVD%20(2).png)
.png)
Share
Ensuring the safety and efficacy of pharmaceutical products involves more than just the active ingredients. The materials used in packaging and delivery systems can also impact patient safety. This blog post explores the process of toxicological assessment of Extractables and Leachables (E&L), highlighting the importance of evaluating these substances to maintain product integrity.
Understanding Extractables and Leachables
Extractables are chemical substances released from packaging materials or medical devices when subjected to extreme conditions such as high temperatures, prolonged exposure times, or the presence of organic solvents with varying polarities.
Conversely, leachables are substances that leach into the environment where the pharmaceutical product is located under normal production and storage conditions.
Importance of Evaluating Packaging Interactions
Packaging that comes into contact with pharmaceutical products is made from materials that may interact with the product itself. These interactions can occur during production or storage. To ensure consumer safety, expert toxicologists must evaluate these materials.
Harmonizing International Guidance: ICHQ3E Proposal
In June 2020, a proposal for the international harmonization of ICHQ3E was published. This proposal aims to provide new guidance for assessing and controlling E&L in pharmaceutical, biological, and biotechnological products, as well as combination products of drugs and devices. This guidance will also consider all dosage forms associated with extraction/leaching conditions, the route of administration, the drug indication, and patient exposure.
Current Regulatory Framework for E&L
While awaiting the next publication of ICHQ3E, the regulatory framework applicable to Extractables and Leachables (E&L) primarily includes the following:
Analytical Techniques for Determining E&L
To determine and quantify extractables and leachables, primary packaging is subjected to more extreme conditions than those typically encountered during standard pharmaceutical processes. This is done to identify as many extractables as possible that could potentially become leachables.
The analytical techniques required are subject to Quality Assurance procedures according to the ISO 17025 standard in use at the laboratory and include the following:
Calculating the Analytical Evaluation Threshold (AET) and Safety Concern Threshold (SCT)
Through these analyses, impurities are identified and quantified, allowing for the calculation of the Analytical Evaluation Threshold (AET), which defines the limit above which extractable or leachable impurities must be identified and considered for toxicological review.
For the calculation of this threshold, a standard safety toxicological value is used, known as the Safety Concern Threshold (SCT, 0.15 μg/day), always relating it to the material or device and the product dosage.
QbD Group’s Tailored Toxicological Assessments
The QbD Group tailors each toxicological assessment to your specific needs, ensuring compliance with regulatory entities. Additionally, we address any issues that may arise during the evaluation, as well as any potential lack of information for its drafting through our monitoring study service.
We offer the necessary techniques, contacts, follow-up, and management of samples from the time they arrive at the laboratory until the final laboratory report is delivered, which can ultimately be used for the toxicological assessment.
If you have any questions or need further information about our services, please do not hesitate to reach out to us. We are here to assist you in ensuring the highest standards of safety and quality for your products.
.png)
.jpg)
